Active DIY Electronics Projects

(found 10 projects)

Ends after Saturday

INKSI-01: Ultimate Handheld Printer for Large-Scale Printing

Print Big, Print Free, Print Smart with INKSI-01.
Technology / DIY Electronics
Current

1209%

Backers: 562
Funding: HK$940,074 of HK$77,700 (1209% funded)
Average daily pledges: HK$26,113
Campaign Dates: October 29th -> December 8th (2024)
Time left: 4 days, 7 hours, 30 minutes

Ends a week from now

Nova: A Super Bright Tiny RP2040 LED Matrix

A powerful RP2040 board with a vibrant 7x10 addressable LED matrix in a compact design
Technology / DIY Electronics
Current

208%

Backers: 141
Funding: €6,260 of €3,000 (208% funded)
Average daily pledges: €285
Campaign Dates: November 12th -> December 13th (2024)
Time left: 9 days, 6 hours, 57 minutes

Dual-function CANopen module : GPIO expander and I²C gateway

Control GPIOs, analog inputs and PWM over a CANopen network. Interface a CANopen network with a simple I²C bus
Technology / DIY Electronics
Current

15%

Backers: 4
Funding: €471 of €3,000 (15% funded)
Average daily pledges: €24
Campaign Dates: November 14th -> December 14th (2024)
Time left: 10 days, 6 hours, 58 minutes

Long Range MESH Decentralized IoT Network Based on LoRa®

Reach 65535 Nodes | 2.5 Km Range | Remote Configuration | Automatic Routing | Network Self-Healing | Up to 62.5 Kbps | Global Support
Technology / DIY Electronics
Current

414%

Backers: 74
Funding: ¥1,243,940 of ¥300,000 (414% funded)
Average daily pledges: ¥77,746
Campaign Dates: November 18th -> December 18th (2024)
Time left: 14 days, 0 hours, 59 minutes

Ends two weeks from now

Integrating AI with Hardware through Project-Based Learning

Artificial Intelligence Learning Kit: Hands-on Guide to Fine-Tuning Neural Network Models in Computer Vision
Technology / DIY Electronics
Current

455%

Backers: 107
Funding: $29,634 of $6,500 (455% funded)
Average daily pledges: $3,293
Campaign Dates: November 25th -> December 23rd (2024)
Time left: 19 days, 14 hours, 58 minutes

E-Tac-Toe: Redefining Classic Tic-Tac-Toe Gameplay

Electronic Tic-Tac-Toe Board! Combining the nostalgic charm of the classic game with the open-source Arduino technology.
Technology / DIY Electronics
Current

4%

Backers: 3
Funding: $195 of $4,400 (4% funded)
Average daily pledges: $8
Campaign Dates: November 10th -> December 25th (2024)
Time left: 21 days, 20 hours, 37 minutes

Ends more than three weeks from now

WAN-4-ALL Programmable LoRaWAN IoT Module and Maker Board

A compact embeddable ESP32–based LoRaWAN IoT module and development break-out for Arduino MKR, MikroBUS, Feather and Grove shields.
Technology / DIY Electronics
Current

8%

Backers: 10
Funding: £558 of £6,500 (8% funded)
Average daily pledges: £70
Campaign Dates: November 26th -> December 26th (2024)
Time left: 22 days, 4 hours, 56 minutes

Master Arduino and ESP Microcontrollers

Dive into Arduino Tutorials and ESP32/ESP8266 Projects in Our Comprehensive eBook
Technology / DIY Electronics
Current

250%

Backers: 9
Funding: €250 of €100 (250% funded)
Average daily pledges: €42
Campaign Dates: November 28th -> December 28th (2024)
Time left: 24 days, 4 hours, 5 minutes

50KM Bluetooth Range & 2Mbps Speed: MultiNav Pro+ BLE

Dual-Core Power, Real-Time Data, and Seamless Connectivity for Drones, Robotics, and More
Technology / DIY Electronics
Current

189%

Backers: 96
Funding: $9,483 of $5,000 (189% funded)
Average daily pledges: $287
Campaign Dates: November 1st -> December 31st (2024)
Time left: 27 days, 5 hours, 59 minutes

BATTERY HEATING STOVE WITH SOLAR PANEL (12 v)

the prototype of a heating stove that uses a 12V battery with solar panel, our intention is to achieve heating for a 20m2 room
Technology / DIY Electronics
Current

0%

Backers: 1
Funding: €16 of €35,000 (0% funded)
Average daily pledges: €3
Campaign Dates: November 29th -> January 8th (2025)
Time left: 35 days, 0 hours, 5 minutes
< Previous 1 Next >

(total 10 results)